Synthesis Of Cellulose (Maizecob)-Graft-Poly(Acrylamide) Copolymer For The AD Sorption Of Indigo Blue

S.A. Isah S. M. Gumel, M. Ladan

Published 2026-10-02 · pp. 1-22

In this study, hydrogel was synthesized by graft copolymerization of acrylamide into a maize cob cellulose backbone using N’N-Methylene Bis Acrylamide (MBA) as crosslinker and...

Cellulose, Maize cobs, Acrylamide, Hydrogel

Abstract Read PDF

Preparation, Characterisation And Application Of Shea Butter Alkyd Resins As Binder Paints

Sharif N. U, Haruna Musa +2 more

Published 2026-10-02 · pp. 23-33

The physico-chemical properties of Shea butter was determined and used in the synthesis of alkyd resin using glycerol and phthalic anhydride at 230-250oc. The prepared alkyd...

Shea butter oil (SBO), Shea butter Alkyd resin (SBAR), Paint, Binder

Abstract Read PDF

Preparation Of Spent Chrome Liquor For Reuse As Retaining Agent For Vegetable Tanned Leather

S.F. Tanko, J.D. Putshaka +3 more

Published 2026-10-02 · pp. 34-42

Full vegetable tanned upper leathers were produced according to standard procedures with shrinkage temperature of 72°C. They were cleared with 0.5% oxalic acid to pH 3.0 and...

reuse, retanned, semi-chrome, spent-chrome liquor

Abstract Read PDF

Study Of Comparative Mechanical Characterization Of AFRICA FAN PALM ( BORASSUS AETHIOPUM) PETIOLES AND SAW DUST PARTICLE REINFORCED UREA-FORMALDEHYDE COMPOSITES

A.A. Salihu, P.A.P. Mamza

Published 2026-10-02 · pp. 43-52

A research work on the polymer particleboard composites using Africa fan palm petioles (AFPP) fibre and saw dust (SD) fibre as reinforcement and urea -formaldehyde (UF) as...

Africa fan palm petioles, Mechanical properties, Morphology, Particleboards, Saw dust.

Abstract Read PDF

Utilization Of Response Surface Methodology In The Sorption OF CRUDE OIL BY WASTE POLYPROPYLENE PLASTICS

C. B. Okpanachi, E. B. Agbaji +2 more

Published 2026-10-02 · pp. 53-62

In this study, waste propylene plastics (WPP) were used as sorbents for the removal of crude oil. The reactions were described by the use of central composite design as the...

Central composite design, Crude oil, Pollution, Polypropylene, Sorption

Abstract Read PDF

Reinforcing potential of acetone pretreatedCalamusdeerratusfibre as filler in Natural Rubber and Epoxidized Natural Rubber Vu lcanizates

E. Osabohien, B.E Okoh +1 more

Published 2026-10-02 · pp. 63-76

The present study investigated the potential of acetone pretreatedCalamusdeerratus fibre (CDF) on the cure characteristics and physico-mechanical properties of natural rubber,...

Natural rubber, epoxidized natural rubber, acetone treatedCalamusdeerratusfibre, fillers and reinforcement

Abstract Read PDF

Mechanical Properties Utilization of a Leather Lubricated Using Modified Lophira Lanceolata Seed Oil for Footwear and Leather Goods Manufacturing

B Habila, P.A.P Mamza +1 more

Published 2026-10-02 · pp. 77-82

: Special mechanical performance properties of leather depends on the fields of use (especially shoes and leather goods) and specific performance characteristics of the...

Fatliquor, Ball-burst, Lophira lanceolata seeds oil, Sulphonic acid, ATM

Abstract Read PDF

Effect Of Calcium Carbonate And Ficus Polita Seeds Powder On THE CREEP RECOVERY AND THERMODYNAMIC MECHANICAL PROPERTIES OF POLYPROPYLENE, POLYSTYRENE AND POLVINYLACETATE TER -BLEND

Shuaibu M.A, Mamza P.A.P +2 more

Published 2026-10-02 · pp. 83-97

The creep recovery and thermodynamic mechanical properties of pristine polypropylene (PP), blends without filler (PP/PS/PVAc), blend with filled with calcium carbonate (B/CaCO3)...

Blend, filler, creep recovery, thermodynamic mechanical analysis and compression moulding technique

Abstract Read PDF